标准信号源

标准信号源是为一款专门为降低用户生产线仪表设备成本开发的通用信号源产品，可以满足大多数用户常规指标的测试和调试需求。
特点：
1.最高输出频率可达110GHz
2.CW/脉冲调制
3.选件：OP2201低相位噪声、OP2202内置电池
4.控制方式：以太网接口/蓝牙/USB/WIFI

PSA

Frequency Range PM-SA-20 10MHz ~ 20GHz
PM-SA-40 10MHz ~ 40GHz
PM-SA-67 10MHz ~ 67GHz (Pre-release)
PM-SA-110 10MHz ~ 110GHz (Pre-release)
Step (kHz) 1
Switching Time (uS) ≤200
Output Level -25dBm-+15dBm
Power Step (dB) 0.1
Output Power Stability (dB) ±0.5 (0 ~ +40V);
±1.5 (0 ~ +40V);
Output Power Accuracy (dB) ±1.5 ( < 0dBm )
±0.5 ( > 0dBm )
Frequency Temperature Stability ±0.3ppm (Synchronous external reference)
Frequency Accuracy ±0.3ppm (Synchronous external reference)
Spurious (dBc) ★ -65 (Typical)
Harmonics (dBc) ★ 10MHz to < 3GHz : ≤-30
≥3GHz: ≤-40
Operating Temperature (℃) -40 ~ +85
Storage Temperature (℃) -55 ~ +95

Pulse Modulation

Modulation Depth ★★ ≥60dBc
Pulse Modulation Width 100ns ~ 10ms
Pulse Cycle 500ns ~ 10ms
Pulse Up Edge / Down Edge 30nS/50nS
  NOTES:
★
★★ 		Test conditions: output power OdBm, ambient temperature +25℃.
Test conditions: output power 10dBm, ambient temperature +25℃.

Normal Phase Noise Mode

Phase Noise 0.5GHz 1GHz 2.5GHz 5GHz 10GHz 20GHz
dBc/Hz@10Hz ≤-79 ≤-73 ≤-64 ≤-58 ≤-52 ≤-46
dBc/Hz@100Hz ≤-109 ≤-103 ≤-94 ≤-88 ≤-82 ≤-76
dBc/Hz@1kHz ≤-121 ≤-115 ≤-103 ≤-98 ≤-92 ≤-86
dBc/Hz@10kHz ≤-131 ≤-125 ≤-113 ≤-108 ≤-102 ≤-96
dBc/Hz@100kHz ≤-133 ≤-127 ≤-117 ≤-111 ≤-105 ≤-99
dBc/Hz@1MHz ≤-138 ≤-135 ≤-130 ≤-120 ≤-110 ≤-103
dBc/Hz@10MHz ≤-148 ≤-145 ≤-145 ≤-145 ≤-135 ≤-129

Low Phase Noise Mode

Phase Noise 0.5GHz 1GHz 2.5GHz 5GHz 10GHz 20GHz
dBc/Hz@10Hz ≤-91 ≤-85 ≤-76 ≤-70 ≤-64 ≤-58
dBc/Hz@100Hz ≤-121 ≤-115 ≤-106 ≤-100 ≤-94 ≤-88
dBc/Hz@1kHz ≤-133 ≤-127 ≤-115 ≤-110 ≤-103 ≤-98
dBc/Hz@10kHz ≤-139 ≤-137 ≤-125 ≤-120 ≤-113 ≤-108
dBc/Hz@100kHz ≤-143 ≤-139 ≤-129 ≤-123 ≤-117 ≤-111
dBc/Hz@1MHz ≤-148 ≤-145 ≤-143 ≤-132 ≤-122 ≤-115
dBc/Hz@10MHz ≤-155 ≤-155 ≤-152 ≤-150 ≤-145 ≤-139